Residential Fire Doors 2026

First page Table of contents 1 Next page Last page

v1.0.0

FIRE-RATED DOORS REEB® IN-STOCK RESIDENTIAL & LIGHT COMMERCIAL CATALOG

Choosing the right fire door depends on whether your project is residential or light commercial, each requiring different specifications. Reeb ® offers a variety of fire-rated doors, and the products in this catalog are ideal for multi-family homes, condominiums, apartment buildings, and residences that must meet local building codes. Important: Building codes vary by location. Always verify requirements with your local authorities to ensure compliance before ordering or installing any door unit.

Trust in Every Door with Fire-Rated Doors

Table of Contents

Neutral vs. Positive Pressure How to Choose a Fire-Rated Door

20-Minute Fire-Rated Wood Edge Therma-Tru® Smooth-Star® Therma-Tru® Profiles Steel ™ Therma-Tru® Traditions Steel ™

Hardware & Accessories 12 90-Minute Hinges 12 20-Minute Hinges 12 Door Viewer 12

8 9 9

Locks

90-Minute vs.

Frames & Sills

Rough Openings

20-Minute Units

90-Minute Split-Steel Frame 20-Minute Frame Options

10 10

Reinforced Doors

90-Minute Fire-Rated Steel Edge

90-Minute Sill Options

11 11

20-Minute Inswing Sill Options

Image Index

RSP 24 Gauge RSP 22 Gauge

6 7

Resources

Neutral vs. Positive Pressure

The Underwriters Laboratory (UL) and Warnock Hersey (Intertek Testing Services) are the entities that test and rate all fire doors. To properly rate the door, it must be tested as a complete unit with hardware and installed on a wall with a test environment behind it. The primary purpose of the test is to ensure the door can contain the spread of the fire. A neutral pressure area is below the pressure plane, and a positive pressure area is above the plane. Neutral Pressure

Positive Pressure Positive pressure assumes the pressure plane is 40” from the bottom of the door. Air flows into the room at the bottom, but flows out at the top. Along with the circulating air, dangerous gases or flames may also escape causing the door’s face to burn.

Neutral pressure assumes the pressure plane to be above the top of the door, and the pressure will not build up in the room containing the fire. Air flows into the room at the bottom and top of the door preventing flames from spreading. A weatherstrip helps to eliminate the smoke leaving the room.

Positive Pressure Zone

Neutral Pressure Plane

Airflow

Neutral Pressure Plane Neutral Pressure Zone

Neutral Pressure Zone

Airflow

How to Choose a Fire-Rated Door

Step 1 Determine if a fire rating is required Laws and regulations regarding fire ratings can vary between states, cities, townships, and municipalities. Always be sure to check all regulating authorities to ensure the door units you order and install will comply with applicable laws. Reeb® stocks two types of fire-rated doors: 20-Minute and 90-Minute. Step 2 Choose a door After determining what fire rating is needed, the next step is choosing a door style. Step 3 Choose a frame To choose the correct frame type, determine if your wall construction is drywall or masonry. If drywall, Reeb stocks two types of steel frames: hollow metal and commercial split steel. Masonry frames are hollow metal. Step 4 Select your hardware and accessories Reeb offers an extensive line-up of commercial hardware that can be used for residential and light commercial uses - including exit devices, closers, locks and more.

Choosing a door’s rating is important, but the unit’s rating is dependent on all the components used. The lowest rated item in the entire unit determines the rating. For example, a 90-minute rated door placed in a 20-minute rated frame has a 20-minute rating.

90-Minute vs. 20-Minute Units

90-Minute Units A 90-minute unit is created with a steel-edge door and split steel frame. The Reeb® Specialty Products steel-edge doors have an entire steel edge creating a sturdier steel door. These doors are insulated with a polyurethane core and tested to withstand at least 90 minutes of fire exposure. The RSP split steel frame accompanies this door to create a 90-minute unit. Full Steel-Edge Door | Polyurethane Core

TOP EDGE OF DOOR

20-Minute Units There are a few ways to create a 20-minute unit. The RSP steel-edge doors can pair with a 20-minute wood or composite frame, and the 20-minute frame can pair with wood-edge doors. The Therma-Tru® wood-edge doors have a polyurethane core for insulation. These fiberglass and steel doors were tested to withstand at least 20-minutes of fire exposure. The 20-minute Therma-Tru® doors can also pair with the 90-minute RSP split steel frame for easy installation based on the application need. Wood-Edge Door | Polyurethane Core

TOP EDGE OF DOOR

90-Minute Fire-Rated Steel Edge Reeb® Specialty Products | 24 Gauge

RF1* 2/6 6/8 2/8 6/8 7/0 2/10 6/8 3/0 6/8 7/0 8/0

RF11* 2/8 6/8 3/0 6/8

RF24* 2/8 6/8 2/10 6/8 3/0 6/8 7/0 8/0

RF24* (ADA) 2/10 6/8 3/0 6/8

RF26* 2/8 6/8 2/10 6/8 3/0 6/8

RF31* 2/8 6/8 3/0 6/8

RF52* 2/8 6/8 2/10 6/8 3/0 6/8

RF29* 2/8 6/8 2/10 6/8 3/0 6/8

RF55* 2/8 6/8 3/0 6/8 7/0

RF60* 2/6 6/8 2/8 6/8 7/0 2/10 6/8 3/0 6/8 7/0 8/0

* This door does not have stile lines.

Reeb® Specialty Products | 22 Gauge

SHAKER

RF11S* 2/8 6/8 7/0 8/0 2/10 6/8 7/0 3/0 6/8 7/0 8/0

RF24S* 2/8 6/8 7/0 8/0 2/10 6/8 7/0 3/0 6/8 7/0 8/0

RF24S* (ADA) 2/10 6/8 3/0 6/8

RF31S* 2/8 6/8 7/0 2/10 6/8 7/0 3/0 6/8 7/0

RF33S* 2/8 6/8 7/0 3/0 6/8 7/0

* This door does not have stile lines.

20-Minute Fire-Rated Wood Edge

Therma-Tru ® | Smooth-Star ® Collection

SHAKER

SSF100* 2/8 6/8 3/0 6/8

SSF1100 2/8 6/8 3/0 6/8

SSF120 2/8 6/8 3/0 6/8

SSF220 2/8 6/8 8/0 3/0 6/8 8/0

SSF8220

SHAKER

SSF200 2/6N 6/8

SSF8200

SSF205 2/8 6/8 8/0 3/0 6/8 8/0

SSF8205

SSF4800 2/8 6/8 3/0 6/8

SSF600 2/8 6/8 3/0 6/8

2/8 6/8 8/0 3/0 6/8 8/0

SSF960 2/8 6/8 3/0 6/8

SSF160 2/6N 6/8

SSF8160

2/8 6/8 7/0 8/0 3/0 6/8 7/0 8/0

* This door does not have stile lines.

Therma-Tru ® | Profiles Steel ™ Collection

100* 2/0 6/8 2/4 6/8

978HD* 2/8 6/8 3/0 6/8

1005HD* 2/8 6/8 3/0 6/8

205HD* 2/8 6/8 3/0 6/8

2/6 6/8 7/0 2/8 6/8 7/0 2/10 6/8 3/0 6/8 7/0

969HD* 2/8 6/8 3/0 6/8

203HD* 2/8 6/8 2/10 6/8 3/0 6/8

210HD* 2/6N 6/8 2/8 6/8 7/0 2/10 6/8 3/0 6/8 7/0

Therma-Tru ® | Traditions Steel ™ Collection

TS100* 2/0 6/8 2/4 6/8 2/6 6/8 2/8 6/8 3/0 6/8

TS214* 2/8 6/8 3/0 6/8

TS210* 2/6N 6/8 2/8 6/8 2/10 6/8 3/0 6/8

* This door does not have stile lines.

Frames & Sills 90-Minute Split-Steel Frame

• • • • •

Manufactured of galvannealed steel

Kerfed to accept weatherstrip

18-gauge base frame

18-gauge closure package 4” hinge with 5/8” radius

• Standard 4-7/8” ANSI strike prep with 2-1/4” full-lip strike adaptor • 2-3/4” x 1-1/8” Deadbolt Strike Prep • Also available for a mortise lock application for single bore

20-Minute Frame Options

20-minute frames pair well with 20-minute doors to create a 20-minute rated unit. These frames can also be used with the RSP 90-minute doors, but the result will be a 20-minute rated unit.

PRIMED

FRAMESAVER

SOLID CLEAR PINE

ON-GUARD PRIMED

ON-GUARD GRAINED

90-Minute Sill Options

The option to have No Sill is also available in limited sizes.

ADA SILL

FIXED SILL

ADJUSTABLE SILL

THERMAL BREAK ADA

TILE-BACK SILL

OUTSWING SILL 20-Minute Inswing Sill Options

HARDWOOD ADJUSTABLE SILL

COMPOSITE ADJUSTABLE SILL

PUBLIC ACCESS WITH THERMAL BREAK

JAMB DEPTH FOR NO SILL 6/8 DOOR 4-1/2”-5-1/2” 5-1/2”-6-1/2” 6-1/2”-7-1/2”

JAMB DEPTH FOR STANDARD SILL

6/8 DOOR

7/0 DOOR

8/0 DOOR

4-1/2”-5-1/2”

5-1/2”-6-1/2”

6-1/2”-7-1/2”

7-1/2”-8-1/2”

JAMB DEPTH FOR PUBLIC ACCESS THERMAL BREAK SILL

JAMB DEPTH FOR PUBLIC ACCESS SILL

6/8 DOOR

7/0 DOOR

8/0 DOOR

6/8 DOOR 4-1/2”-5-1/2” 5-1/2”-6-1/2”

4-1/2”-5-1/2”

5-1/2”-6-1/2”

6-1/2”-7-1/2”

7-1/2”-8-1/2”

Hardware & Accessories 90- Minute Hinges 4”x4” with 5/8” Radius Available Finishes: US1D, US3, US4B, US5, US10B, US15, US26D, US32D

SELF-CLOSING

BALL-BEARING

BALL-BEARING NRP

Door Viewer Available Finishes: US3, US5, US10B, US15, US26D Also available for Flat Panel Shaker Doors: US10B, US15

20-Minute Hinges 4”x4” with Square 5/8” Radius Available Finishes: US1D, US3, US4B, US10B, US15, US26D, US32D (Radius Only)

BALL-BEARING SQUARE OR RADIUS

SELF-CLOSING SQUARE OR RADIUS

Available Finishes

US1D Flat Black

US3 Bright Brass

US4B Zinc Dichromate

US5 Antique Brass

US10B Oil Rubbed Bronze

US15 Satin Nickel

US26D Satin Chrome

US32D Stainless Steel

Locks

Withnell 3500 Series Grade 2 Cylindrical The 3500 Series lockset is used in a single bore application with a 2-3/4” backset. This lock is great for high traffic use and is classified as a Grade 2 Cylindrical Lever. Withnell 3200 Series Grade 2 Deadbolt The 3200 Series are Single Cylinder Deadbolts have a 2-3/4” backset. A single cylinder requires a key on the exterior but has a thumbturn on the interior.

FUNCTION US10B US26D

3215 Single Cylinder

3215 Cylinder

FUNCTION US10B US26D 3510 Passage x x 3540 Privacy x x 3553 Entry x x 3570 Classroom x x 3580 Storeroom x x 3517 Dummy x x FUNCTION US10B US26D 3610 Passage x x 3640 Privacy x x 3653 Entry/Office x x 3680 Storeroom x x 3617 Dummy x x

3553 Entry

Withnell 3600 Series Grade 2 Tubular

The 3600 Series lockset is used in a single bore application and is adjustable to work with either a 2-3/8” or 2-3/4” backset. This lock is great for medium traffic use and is classified as a Grade 2 Tubular Lever.

3653 Entry/Office

FUNCTION 3500 Passage Latchbolt operated by lever from either side at all times. Latchbolt operated by lever from either side at all times. 3600

Latchbolt operated by lever from either side. Outside lever is locked by push button and unlocked by emergency release outside, operating inside lever, or closing door. Deadlocking latchbolt operated by lever from either side. Pushing turn button locks outside lever, unlocked by turning inside lever. Pushing in and turning button locks outside lever, unlocked by manually turning button to unlock. Inside lever always free. Deadlocking latchbolt operated by lever from either side except when outside lever is locked from outside by key. When outside lever is locked, latchbolt is operated by inside lever. Deadlocking latchbolt operated by key in outside lever or by operating inside lever. Outside lever is always locked. Inside lever is always unlocked.

Latchbolt operated by lever from either side. Outside lever is locked by push button and unlocked by emergency release outside or operating inside lever. Deadlocking latchbolt operated by lever from either side except when outside lever is locked by push button on the inside. Unlocked by key or by turning inside lever.

Privacy

Entry

Classroom

Not Stocked

Deadlocking latchbolt operated by key in outside lever or by operating inside lever. Outside lever is always locked. Inside lever is always unlocked.

Storeroom

Dummy

Pull one side, no mechanical operation.

Rough Openings

Rough openings vary depending on the sill type and the door width. Sill options include a standard sill, no sill, or a public access (ADA) sill for both inswing and outswing units. Ensure the closure package jamb depth and sill application match what is needed in the field.

Below are the minimum drywall rough openings. For 7’ doors, add 4” to the height dimensions and for 8’ doors, add 16” to the height dimension.

REEB® SPECIALTY PRODUCTS SERIES FIRE DOORS

SIZE

STANDARD SILL

NO SILL

ADA SILL

2668

31-1/4” X 81-3/4”

31-1/4” X 80-1/2”

N/A

2868

33-1/4” X 81-3/4”

33-1/4” X 80-1/2”

33-1/4” X 81”

21068

35-1/4” X 81-3/4”

35-1/4” X 80-1/2”

35-1/4” X 81”

3068

37-1/4” X 81-3/4”

37-1/4” X 80-1/2”

37-1/4” X 81”

Steel-edge doors with a bore may also need a door closer, while doors with no bore will need panic hardware. Additional reinforcements are necessary to ensure the door will stand up to continual usage. A reinforced door includes additional material on the back of the door skin for extra protection. Reinforced Doors

Didn’t find what you were looking for in this catalog? Check our Reeb® In-Stock Commercial catalog for reinforced door parts.

DOOR IS REINFORCED FOR A CLOSER AND PANIC HARDWARE

Image Index

PAGE

DOOR STYLE

COVER

RF60

RF11 & RF1

RF31S

RF60

SSF205

COMMERCIAL DOORS True commercial doors are best suited for doctor’s offices, banks, and small office buildings. Made of hollow metal, they can have a 90-minute rating.

PRODUCT WARRANTIES Scan here to view the warranties online for the products in this catalog, along with our other In-Stock Reeb® products.

Scan here to visit our Commercial Catalog online to view door styles.

A LEARNING CENTER FOR EVERYTHING DOOR RELATED

PRODUCT EDUCATION Sharpen your sales skills with focused insights on Reeb’s full product lineup. GUIDED LEARNING Build a strong foundation or explore advanced topics with step-by-step learning.

SHORT, ENGAGING VIDEOS Clear, visual guidance for features, and best practices. MANUFACTURER VIDEOS

Gain insights directly from the source with featured videos from trusted manufacturers.

START LEARNING TODAY AT LEARN.REEB.COM

FREE ACCESS

MOBILE FRIENDLY

24/7 AVAILABILITY

Providence, RI 19 Business Park Dr. Smithfield, RI 02917 (800) 343-5703 voice (800) 388-5979 fax Mocksville, NC 346 Bethel Church Rd. Mocksville, NC 27028 (800) 642-0886 voice (800) 618-0620 fax Syracuse, NY 7475 Henry Clay Blvd. Liverpool, NY 13088 (800) 422-5224 voice (800) 531-7332 fax Barclay, MD 1315 Goldsboro Rd. Barclay, MD 21607 (800) 825-8331 voice (800) 331-9387 fax Bethlehem, PA 1000 Maloney Cir. Bethlehem, PA 18015 (800) 862-8622 voice (800) 772-7332 fax

PART# REEBRESFIRE26

VERSION 1.0.0

Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16

Made with FlippingBook Annual report maker