Reeb Price Catalog - Exterior Doors - Effective 05/20/2024

Therma-Tru Additions and Deductions

How To Order

When ordering a Therma-Tru door, the following information is required: 1. Quantity, size (width and height) and door design number (sidelite also if required). 2. Type of unit: Single, Double, 1- or 2-sidelite combination, transom, 2- or 3-door patio unit. 3. Door Handing; for double doors, the active panel must be specified. 4. Jamb width: standard jamb width is 4-9/16” however additional jamb sizes are available. 5. Door Swing: standard is inswing, please specify outswing or stationary. 6. Backset: standard backset is 2-3/4” for 3/0 doors, standard facebore is 2-1/8”. Note: Classic Craft doors require a 2-3/8” backset, see boring specifications for other limitations. 7. Other Additions and Deductions for Therma-Tru doors can be found in this section of this book. 8. Storm Door Ready Unit: Units with a continuous sill can include a storm door ready mullpost. Door Anatomy

Transom

Transom Sash

Rail

Door Lite

Brickmould/Casing

Sidelite

Sidelite

Sticking

Mull Post

Jamb

Stile

Panel

Standard Hinge Location from Top of Door Top Hinge Second Hinge Third Hinge Fourth Hinge

6/8, 7/0 8-3/8"

37-5/8" 66-7/8”

n/a

Sweep

Door

Sill

8/0

5-1/4"

30-3/4" 56-1/4” 81-3/4”

Outside

Double Doors

Double Doors

Single Door

Single Door

Left Hand Inswing

Right Hand Inswing

Left Hand Active Inswing

Right Hand Active Inswing

Left Hand Outswing

Right Hand Outswing

Left Hand Active Outswing

Right Hand Active Outswing

Inside

Therma-Tru Doors - Page 2 4Q2018 Visit our online catalog at reeb.com/pricecatalog

Made with FlippingBook flipbook maker